Mud Guards Front – 2017-2026 Tesla Model 3
Mud Guards Front – 2017-2026 Tesla Model 3
Replace a broken or missing mud guards front on your 2017-2026 Tesla Model 3 with this 3D printable part from PartsRemade.
About this part
3D printed Mud guards for the Tesla Model 3 front wheels. Installation is very easy and takes only a few minutes. No drilling or other modifications is required.
Print the parts, remove any sharp edges, blobs or other imperfections and open up the hole for the push-in clip. Rub over the visble areas with a 3M Scotch Brite pad and plenty of water to obtain a nice matte finnish.
Hardware:
6 pc M3x8mm stainless screws (hex button head or hex socket head recommended), 6 pc stainless M3 nuts. Please note that the screw length must be exactly 8mm.
Tools:
Allan-key for the M3 screws and a flat screw-driver for the Tesla push-in rivet
Installation:
- Clean the area thoroughly, there must be no sand or dirt between the paint and the printed parts.
- Release and remove the Tesla plastic push-in rived using the flat screw-driver.
- Assemble the printed mud guard and the back plate. Let only a few threads on the M3 screws grip into the M3 nuts to make maximum slack between the two printed parts.
- Keeping some spacing between the printed parts, carefully slide the mud guard into position, the back-plate goes behind the steel lip.
- Adjust position.
- Reinstall the Tesla plastic push-in rivet.
- Fine adjust the position again if neccessary.
- Tighten the M3 screws.
Compatible vehicles
- 2017-2026 Tesla Model 3
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | Mud Guards Front |
|---|---|
| Make | Tesla |
| Model | Model 3 |
| Year | 2017 |
| Format | Digital download – STL file for FDM 3D printing |
| Files included | 5 (STL, STP) |
| Part number | CAT-02ccddfc |
Print settings
Standard FDM printing settings:
- Layer height: 0.2mm
- Infill: 70%
- Supports: As needed
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Tesla parts
Browse all Tesla replacement parts or search the full 3D printable car parts library.
Design credit: original design on Thingiverse, licensed CC BY-4.0.