Subaru (12mm x 1.25) Shift Boot Retainer
Subaru (12mm x 1.25) Shift Boot Retainer
Replace a broken or missing subaru (12mm x 1.25) shift boot retainer on your Subaru with this 3D printable part from PartsRemade.
About this part
If you are using a round shift knob, you're often stuck with an ugly gap where the shifter comes through the shift boot. This is a little adapter I made because the ones from Amazon are expensive and I'm too impatient for shipping. Installation: Depending on how the print turns out, you may be able to slide the retainer on, or you might have to thread it on. After installing the retainer, add in the jam nut and use the retainer like a wrench to tighten it down. Then when you get the shift knob screwed all the way down, loosen the retainer back up again -- holding the shift knob in place -- until the jam nut is wedged up against the shift knob. Done!
Compatible vehicles
- Subaru
Always compare with your original part before printing. Fitment can vary by trim level and production date.
Specifications
| Part | Subaru (12mm x 1.25) Shift Boot Retainer |
|---|---|
| Category | Mechanical/Functional |
| Make | Subaru |
| Format | Digital download – STL file for FDM 3D printing |
| Files included | 1 (STL) |
| Part number | CAT-P04764 |
What you get
A digital 3D model (STL file) of this part, ready to print on your own 3D printer or at any local print shop or online printing service. This is a digital download: no physical part is shipped. Not sure it fits your car? Contact us with your vehicle details before you buy.
More Subaru parts
Browse all Subaru replacement parts or search the full 3D printable car parts library.
Design credit: original design by Jeremy WW on Thingiverse, licensed CC BY.